Hello, Floridians! Fencing your property is more than just a matter of throwing up some posts and boards. It’s a complex project requiring precise measurement, planning, and, yes, a little bit of geometry.

Whether you’re a do-it-yourselfer or a homeowner who’s new to the fencing game, you need to understand the nuances of properly measuring your property for fencing.

This guide is designed to provide you with all the essential knowledge and tips to accurately measure your property like a pro. By the end of this guide, you’ll be well-prepared to request an accurate estimate from us here at Western Fence Supply, your trusted fence supply company in Fort Myers, Florida.

Disclaimer:

The information included in this article is based on general industry standards and practices. For the most accurate and personalized details, we strongly recommend calling our sales team at Western Fence Supply.

Table of Contents

1. Initial Preparations: What You Need to Know
2. Gathering the Right Tools: Checklist
3. Understanding Property Corners and Boundaries
4. Creating a Sketch: Layout Your Property
5. Importance of Marking Starting and Ending Points
6. Measuring the Linear Feet: How-To
7. Accounting for Obstacles and Features
8. Gate Planning: Types and Costs
9. Finalizing Your Measurement Sheet: Best Practices
10. Getting a Quote from Western Fence Supply: Next Steps

Initial Preparations: What You Need to Know

Embarking on a fencing project? Your enthusiasm is admirable, but the initial stages of planning are critical for the project’s success. A lot more goes into fencing than most people realize. Here are some crucial factors you should consider before unrolling that measuring tape:

Check Local Laws and Regulations

Building permits aren’t just for large construction projects; even your small backyard fence may need one. Check your local and county ordinances.

Share Costs with Neighbors

If your fence will be dividing your property from your neighbor’s, it might be courteous (and economical) to discuss sharing the cost of the fence. After all, both parties will benefit from the added privacy and security. Make sure to discuss materials, height, and maintenance responsibilities in advance.

Pools and Waterways: Safety First

If your property includes a pool or is adjacent to waterways, you’ll need to comply with state and local laws that usually require fencing for safety reasons. For pools, this often means a fence that’s at least four feet high and has self-closing, self-latching gates.

Street and Roadway Setbacks

Setback regulations dictate how far your fence needs to be from streets and roadways. These rules can vary widely depending on your jurisdiction, so consult local codes to ensure compliance.

Homeowners Association (HOA) Requirements

Last but not least, if you’re part of a Homeowners Association, they’ll likely have guidelines (or even strict rules) about the type, height, and color of fence you can install. Violating these rules can lead to forced removal of the fence and hefty fines, so read your HOA contract carefully.

Repair or Replace Existing Fences

If you’re replacing an existing fence, you may need to consider the costs of removal and disposal of the old fencing material. If it’s a shared fence, this will have to be negotiated with your neighbor. On the other hand, minor damages might just require some repairs. Assess the state of any existing fences to see if they can be repaired instead of replaced, as this can significantly affect your budget.

By preparing thoroughly in these areas, you’re laying a strong foundation for a smooth fencing project. Not only does this preparation make the actual installation easier, but it also helps in getting an accurate cost estimate for your fence, making it easier to budget and plan.

Next Steps

Having tackled these initial considerations, you’re now ready to move on to the more tactical aspects of your fencing project, such as gathering the right tools, understanding your property’s dimensions, and mapping out the exact specs of your fence.

So grab your tape measure, don your DIY hat, and read on to delve into the nitty-gritty details of fencing your Floridian paradise!

Tools and Equipment: The Gear You Need for Accurate Measurements

In the fencing industry, the phrase “Measure twice, cut once” is more than a catchphrase; it’s a mantra that saves time, money, and headaches. A well-executed fence starts with meticulous planning and precise measurements. If you want an accurate quote from Western Fence Supply, you’ll need to come armed with specific measurements and details. Here’s what you need for that:

Land Survey

Before you even think about buying materials, have your property professionally surveyed, especially if you don’t have a recent survey. This will not only ensure that your fence is within your property lines but also that it meets local laws regarding how close you can build to your neighbor’s property.

Locate Property Pins

Property pins are small stakes that are driven into the ground at each corner of your property, usually flush with the ground. If these pins aren’t visible, a metal detector can often help locate them. Knowing where these pins are can be essential for defining the parameters of your fence.

Rolling Measuring Wheels

A rolling measuring wheel can be your best friend when measuring the perimeter of your property. Simply reset the counter to zero, and walk the wheel along the area where you intend to place the fence. It measures as you go, offering a highly accurate measurement that you can then provide for your fencing quote.

String lines

Stringlines are indispensable for ensuring that your fence will be straight. These should be set up after you’ve measured but before you start digging any holes. The string serves as a real-world guide as you start to install the fence, ensuring that you’re building in a straight line.

Shovels for Prospecting

Before you commit to a fence line, it’s wise to do a little prospecting. Use a shovel to dig small holes along the proposed fence line to check for roots, rocks, or other obstructions that could make digging difficult or cause your fence to be uneven. If your property is particularly large, you might even consider renting a small auger to make this process faster.

Utility Marking

Don’t forget to call 811 before you dig to mark any utility lines, to avoid an accident or additional costs. It’s generally a free service and will keep you from accidentally hitting a buried utility line while digging.

By using these tools and taking these steps, you can ensure that your measurements are as accurate as possible. This is crucial for getting an accurate quote for your fence. Plus, by doing this legwork up front, you’ll make the installation process go more smoothly, whether you’re doing it yourself or hiring a contractor.

Ready to Measure?

By now, you should be equipped with the knowledge and tools you need to accurately measure your property for your fencing project. Once you’ve completed these steps, you’re ready to contact us at Western Fence Supply in Fort Myers, Florida, for a detailed and precise quote that will bring you one step closer to enjoying your new fence. Happy fencing!

Understanding Property Corners and Boundaries

Your property corners and boundaries are not just physical markers; they are legal distinctions. Identify these corners either from your property deed or by employing a land surveyor. Once identified, mark them with stakes or flags.

Creating a Sketch: Your Blueprint for a Perfect Fence

A sketch is more than a doodle on a piece of paper; it’s a preliminary blueprint for your entire fencing project. Creating a sketch allows you to visualize your project, anticipate challenges, and clarify your fencing needs, which, in turn, allows us at Western Fence Supply to give you the most accurate quote possible. Here’s a list of key aspects you should include in your sketch:

Notate Runs of Fence

Clearly mark the straight sections or ‘runs’ of your fence on the sketch. This helps determine how many fence panels you’ll need. Indicate the length of each run in feet or meters for an accurate cost estimate.

Corners

Denote where the fence takes a turn, effectively creating a corner. Corners often require specific types of posts or hardware, so noting them will help in material calculation.

Ends

Clearly mark the points where your fence will start and finish. This could be your house, a garage, or another structure. Knowing where the fence ends will help you calculate the number of ending posts you’ll need.

Transitions from One Style to Another

Are you planning on mixing it up with different styles of fencing for aesthetics or functionality? Clearly mark these transition points on your sketch and note the styles you intend to use.

Location and Dimensions of Gates

Your sketch must include where the gates will go and how wide they will be. This affects not just the cost, but also how people and vehicles will move in and out of the enclosed area.

Height, Style, and Color

Indicate the height, style, and color of the fence you envision. These factors can significantly affect the final cost and appearance of your fence.

Posts on Concrete or Decks

If any fence posts will be installed on concrete slabs or decks, note this on your sketch. These installations may require special hardware or techniques.

Surrounding a Pool or Waterway

If your fence will enclose a pool or border a waterway, that’s crucial to note, especially because there are often specific legal requirements for such fences.

By including all these elements in your sketch, you’re not just drawing–you’re planning. It can be as simple or as detailed as you need it to be, but the more information you include, the more accurate your quote from Western Fence Supply will be. Armed with your measurements and your sketch, you’re ready to get an accurate and comprehensive fencing estimate from us.

Importance of Marking Starting and Ending Points

On your graph paper, mark the exact points where the fence will begin and end. Also, consider any corners or curves in your fencing, as these may require special types of posts or additional materials.

Measuring the Linear Feet: How-To

Measure the length of each side where the fence will go using your tape measure, moving along the marked boundaries. The term “linear feet” refers to the straight-line distance from one point to another, not taking into account any elevation changes or obstacles. Make sure you note down each measurement on your sketch.

Accounting for Obstacles and Features

Be sure to measure any obstacles like trees, rocks, or inclines. You’ll need to account for these in your fencing plan, and possibly your budget. Depending on the obstacle, you may need specialized posts or fencing material, which could add to the cost.

Gate Planning: Types and Costs

If you’re considering installing a gate (or gates), measure the required width. Types of gates include:

• Pedestrian Gate: About 2-6 feet wide
• Double Vehicle Gate: 8-12 feet wide
• Sliding/Rolling/Cantilever Gate: 10+ feet wide

Each of these gate types varies in price depending on the material, and custom sizes can also influence costs.

Finalizing Your Measurement Sheet: Best Practices

Double-check your measurements to ensure accuracy. Remember to total up the linear feet, the number of gates, and any costs associated with obstacles or special requirements.

Getting a Quote from Western Fence Supply: Next Steps

You’re now armed with precise measurements and a deeper understanding of what goes into fencing your property. The next step is to contact us at Western Fence Supply for an estimate tailored to your specific needs. We offer an array of high-quality fencing materials that can fit any budget and aesthetic, from durable aluminum and chain-link to elegant vinyl and robust metal Durafence.

Conclusion

We at Western Fence Supply, your Fort Myers-based fencing experts, are dedicated to helping you make your fencing project a success. Remember, the devil is in the details, so taking the time to measure your property accurately will save you time, money, and headaches in the long run. We look forward to providing you with the highest quality fencing materials and expert advice. Contact us today for your personalized fencing estimate.

So, South Florida, Southwest Florida, and Central Florida residents, you’re all set to take on your fencing project with confidence! Thank you for choosing Western Fence Supply for all your fencing needs.

The post How to measure for a fence in Florida appeared first on Western Fence Supply.

1. What is the Cheapest Fence to Have Installed?
2. Why is Fencing So Expensive?
3. Cost of Hiring a Fence Contractor vs. Doing it Yourself
   • How Much a Fence Contractor Costs
   • How Much Installing Your Own Fence Costs
4. Estimates on Fence Material Costs
5. Cost Differentials Between Fence Materials
   1. How Much Does Aluminum Fence Cost?
   2. How Much Does Chain Link Fence Cost?
   3. How Much Does Vinyl Fence Cost?
   4. How Much Does Metal Fence or Durafence Cost?
6. How Much Do Gates Cost, and is There an Additional Cost for Custom Sized Gates?
7. How to Obtain Real Pricing on Fence Materials from Western Fence Supply

What is the Cheapest Fence to Have Installed?

Price is often the first thing people consider when looking to install a fence. So, let’s get right to it. The most cost-effective fence types usually include:

• Woven Wire Fences: Popular in rural areas, woven wire fences are particularly effective for keeping out wildlife. Typically, they cost around $2 per foot.
• Barbed Wire Fences: Commonly used for agricultural purposes, barbed wire fences cost about the same as woven wire fences.
• Hog Wire Fences: Often used for gardens or small animal pens, they are in the same price range.

Pro Tip: Always remember that the initial cost of installation is not the only expense. You should also consider long-term maintenance costs, especially for cheaper fence options which may require regular upkeep.

Why is Fencing So Expensive?

When you start to look at higher-end fence materials or specialized installations, the cost can increase considerably. This is due to several factors:

• Quality of Materials: Premium fence materials like aluminum, vinyl, and metal usually come at a higher cost but also offer more durability.
• Labor Expenses: Quality craftsmanship doesn’t come cheap. Depending on your location and the complexity of the installation, you can expect labor costs to significantly impact your budget.
• Additional Features: Adding things like gates, post caps, and other decorative features can add to the cost.
• Geographical and Ground Conditions: In areas with rocky or unstable soil conditions, installation may require specialized equipment or additional labor hours. This can also result in a higher price tag.

If you’re dealing with a complex landscape, such as sloping hills or multiple levels, then grading the ground might be necessary. This alone can cost between $500 to $5,000 depending on the level of complexity.

Cost of Hiring a Fence Contractor vs. Doing it Yourself

How Much a Fence Contractor Costs:

Let’s be upfront: hiring a professional contractor to install your fence can get expensive. However, it’s often worth the investment for several reasons:

• Speed and Efficiency: Professional contractors have the experience and equipment to get the job done quickly.
• Quality: A well-installed fence not only looks better but can also last longer, potentially saving you money on repairs and maintenance in the long run.
• Convenience: When you hire a contractor, they handle everything from obtaining the necessary permits to cleaning up after the job is done.

Labor costs can vary depending on the contractor’s experience and your location. For a high-quality fence installation, labor costs could be anywhere from $30 to $50 per hour, and the total project might range from $1,000 to $5,000 or more based on complexity.

How Much Installing Your Own Fence Costs:

For the handy homeowners out there, the DIY approach is certainly appealing. Not only do you save on labor costs, but you also get the satisfaction of a job well done. Here’s what you’ll need to consider:

• Material Costs: This will be your biggest expense. The price can vary significantly depending on the type of fence material you choose.
• Permit Fees: Before you start digging, you’ll need to get the necessary permits, which can range between $25 to $50.
• Tools and Equipment: You might need to rent or buy special tools for the job, which could add to your costs.

Taking a DIY approach can be cost-effective, but remember that it requires a significant time investment and a fair amount of skill. Mistakes can be costly, both in terms of materials and your own safety.

Estimates on Fence Material Costs

Budgeting for a fence can be a complex task. At Western Fence Supply, we make it easier for you with online calculators and personalized quotes. Bulk purchases often come at discounted prices, which is particularly beneficial for contractors or homeowners with large projects. Always ensure you compare at least three different quotes to get a realistic idea of current market prices.

Cost Differentials Between Fence Materials

Different fence materials come at different costs. Here is a brief breakdown:

Remember, these are average costs and your specific project may require a larger investment.

How Much Does an Aluminum Fence Cost?

Aluminum fences are highly durable and resistant to rust, making them a popular choice in Florida’s humid climate. They generally cost between $20 and $30 per foot. While the upfront cost can be high, remember that aluminum fences require very little maintenance, saving you money in the long run.

Remember, these costs are for the material only and do not include the cost of installation. For a precise quote tailored to your specific needs, it’s best to reach out to us at Western Fence Supply.

How Much Does Chain Link Fence Cost?

Chain link fences are highly versatile and can be used for both residential and commercial properties. The average cost ranges from $5 to $15 per foot. Chain link is one of the most affordable options and is particularly good for large enclosures.

These costs are approximate and only cover the materials. Installation costs will vary depending on the contractor and specific project needs. For accurate, tailored pricing, it’s advisable to contact us at Western Fence Supply.

How Much Does Vinyl Fence Cost?

Vinyl fences have gained popularity for their durability and low maintenance requirements. A vinyl fence can cost you between $15 and $30 per foot, making it a middle-of-the-road option price-wise. However, you’ll save on maintenance costs, as vinyl fences only require occasional washing.

These costs are for the fence materials only and do not include installation costs, which can vary. For the most accurate pricing tailored to your specific needs, it’s always best to consult with us directly at Western Fence Supply.

How Much Does Metal Fence or Durafence Cost?

Metal fences, including Durafence options, offer durability and high-end appeal. These premium fences can cost between $25 and $40 per foot. While the initial investment is higher, these fences often come with longer warranties and can increase the property value.

How Much Do Gates Cost, and Is There an Additional Cost for Custom-Sized Gates?

The average gate installation will set you back between $150 to $500 per gate. Customization, such as adding a company logo or integrating advanced security features, can increase the price.

Types of Usages for Gates and Custom Gates Corresponding with Various Fence Styles

Aluminum Fence Gates

1. Residential Entry: Perfect for demarcating your property line and adding an elegant entryway to your home.
2. Pool Safety: Aluminum gates with secure latches meet many local pool safety regulations.
3. Driveway Entry: Larger, dual gates in aluminum are suitable for driveways.
4. Gardens: Smaller gates fit well for garden entries.
5. Pet Enclosures: Create a secure area for your pets to roam freely.

Chain Link Fence Gates

1. Industrial Sites: Heavy-duty chain-link gates provide secure access to industrial properties.
2. Schools & Playgrounds: Safely enclose play areas and schoolyards.
3. Agricultural Uses: For farm and livestock enclosures.
4. Temporary Entry: Great for construction sites and temporary events.

Vinyl Fence Gates

1. Residential Entry: Works well for backyards and side yards.
2. Pool Safety: A practical choice for enclosing swimming pools.
3. Patio & Decking: For a seamless entry to outdoor living spaces.
4. Garden Entry: Decorative smaller gates can add charm to your garden area.

Metal/Durafence Gates

1. High-Security Areas: Ideal for locations requiring robust security measures.
2. Commercial Buildings: To complement metal privacy fencing around the property.
3. Private Residences: For those seeking both aesthetics and security.
4. Special Events: Custom-designed metal gates can be made for one-time events like weddings or grand openings.

Custom Gates

1. Personalized Design: Tailor-made according to your specific design requirements.
2. Historical Properties: Custom gates can be created to match the historical relevance of a property.
3. Commercial Branding: Include your company logo or brand colors.
4. High-Security Needs: Specialized gates with additional security features like card readers, intercoms, or biometric scanners.

Gates can often be customized in terms of size, color, and other design features to align perfectly with the type and purpose of your fence. Customization typically adds to the cost but provides a tailor-made solution that’s worth the investment.

Table of Approximate Industry Pricing for Various Types of Gates in Florida

Please note: These prices are approximate and are based on industry trends in Florida. For the most accurate and up-to-date pricing, please contact our sales team at Western Fence Supply.

How to Obtain Real Pricing on Fence Materials from Western Fence Supply

The best way to get accurate pricing is to contact us directly at Western Fence Supply. We offer quotes tailored to your specific needs, whether you’re a contractor or a homeowner. Our knowledgeable team can guide you through the various options and help you make the most informed decision.

By carefully considering your specific needs, budget, and options, you’ll be well-equipped to make the most cost-effective decision for your fencing project. Thank you for choosing Western Fence Supply for all your fencing needs in Florida. We look forward to helping you build a beautiful, durable fence that will last for years to come.

Learn how to properly measure for a fence in this companion article.

The post How much does a fence cost in Florida? appeared first on Western Fence Supply.

How To Get Your Hurricane Fence Permit

All residential fence permits must be approved by the county’s Zoning Division. All requests for residential fence permits are checked for conformity to the County’s zoning and building codes. Permits for fencing are checked for conformity with rules on placement, height, and other parameters.

Process

Florida state law mandates that you obtain a permit for the majority of projects, no matter how little.  This is a summary of the stages and procedures needed to obtain a permit for the majority of projects. Additional procedures could be required, depending on your project and the type of permission you want.

1. Plan Your Project: Even if a fence construction permit is not needed, it must nonetheless comply with City Code. Infractions of the fencing codes may result in fines for homeowners.
2. Determine if you need a permit: You may need to obtain a permit if your fence will be any of the following:- On a commercial property, or residential property with three or more housing units.
   -One which is over six feet in height.
   -Any reinforcement (concrete/rebar) that is not stone, wood, or metal, such as posts.
   -Barriers for swimming pools and spas.
   -On or near any public easement as shown on a property survey.
   -Gates that are powered by electricity or other sources (solar, wind, etc.) are included.
   -Consequences of obtaining a demolition permit for the property or the actual demolition of a building there.
   -Florida Building Code, Chapter 33, Safety Precautions During Construction.
   -When situated on a floodplain or in a floodway (Check if your property is located in one of these areas.)

3. Google your city name in Florida along with the keywords “fence permit” to access the official website and get more specific steps for your zone, submit documents, schedule an inspection and check your permit status.

Permit applications for residential fences are mostly submitted digitally. The fence permit can be provided to the homeowner or builder. The time limit for a residential fence permit is 180 days from the day it was issued. To have the Division of Building Safety look at your structural walls or concrete columns, fill out an Application for Building/ Land Use Permit.

Fees usually need to be paid. Please note that if the fence permit is the result of a code enforcement violation, there could be an additional fee.

Google your city in Florida along with the keywords “fence permit” for more precise details.

Get The Necessary Permits

Although some homeowners choose to forego a permit, you shouldn’t—against it’s the law, and although you might get away with it for now, there’s always a possibility you’ll be caught in the long run. In the event that you are discovered to have erected your vinyl fence materials in defiance of local construction requirements or outside of your property line, you may be required to take them down and re-install them in accordance with the rules.

You may end up spending more money on supplies, forking over more cash in penalties, having to wait around for a long time before you can re-install, and still needing a permit. It’s better to do the right thing from the start, even if it takes more time and money to get the necessary permits.

Don’t know about fence regulations? Here’s an example of a fence permit from the building department of North Miami:

When can you expect to hear back about your request for a permit to put up a vinyl fence?

This procedure can indeed be time-consuming, often taking two or three months. If the building and zoning authorities are busy when you apply for a permit, expect a longer processing period. Some localities will let you submit and track your permit application online (although not all), and some cities are far more rapid in approving applications than others.

The answer to this question is very context-dependent, as every municipality contracts with a unique management firm to oversee this process.

Hurricane Fence Repair

Western Fence Supply specializes in manufacturing and distributing the most durable fence materials in the country. Florida’s premier supplier of high-quality vinyl fence, aluminum fence, and chain-link fence components is now dedicated to repairing fences that were damaged by Hurricane Ian’s devastating gusts. In Lee County, Collier County, Charlotte County, and Hendry County, we market to fence businesses and homeowners. Areas like Fort Myers and Cape Coral, two of the main zones affected by the natural disaster, can benefit from our company’s special discounts.

Hurricane Ian could have damaged your fence pickets, posts, rails, hardware, and more. We fabricate all the necessary components for your needs. Make sure to obtain your fence permit and rest assured that we will take care of the whole reparation process.

We can make the parts your fence needs to look as strong as it did when it was first put up.

Get a FREE Estimate on Fence Repair Materials in Central and Southwest Florida.

Western Fence Supply is your #1 ally against Hurricane Ian’s devastating effects. We are here to help you regain confidence in the safety of your home and loved ones. If you have any questions or need clarification, please get in touch with us.

When you’re ready to have your vinyl, chain link, metal or aluminum fence repaired, give us a call at (239) 689-5496, send an email to westernfencesupply@gmail.com, or click here for a free online quotation.

Western Fence Supply has your back. Contact us now!

The post South & Central Florida Hurricane Fence Recovery Guide appeared first on Western Fence Supply.

Properties were affected in all kinds of ways, and their fences were no exception.

Was your fence destroyed by Hurricane Ian?

Did Hurricane Ian knock your fence down? 

For anyone in need who lives in Southwest Florida and whose fences have been damaged, Western Fence Supply is offering FREE fence materials that meet the following requirements: 

• people in need who have young children or pets and live in unsafe conditions.
• Military Veterans.
• Vulnerable Families.
• Elderly Residents.
• Disabled Residents.

A hurricane can do a lot of damage to a property and its fence, but not all fence materials are the same when it comes to how well they hold up in bad weather.

What Characteristics Make a Fence Hurricane-Resistant?

• Sturdy, reinforced posts.
• Strong, high quality materials manufactured with advanced technology.
• Smart Designs with aerodynamic structures.
• High resistance to humidity and salt water (protective coat layers).

The Best Fence Materials Against Hurricanes

Chain Link Fences

chain link fences are the most effective against wind. The wire mesh is permeable to airflow but strong enough to act as a fence, thanks to its many small apertures. These types of fences are available in a wide variety of designs to meet your specific aesthetic requirements. If this fence suits your preferences, it’s your best bet for regions where the wind blows constantly. Remember, a chain link fence is the strongest type of fence during a hurricane because the wind can effortlessly pass through it.

Fun fact: Since the wire mesh and other metal components of a chain link fence are galvanized, they rarely need repairs or upkeep. Galvanized metal is more durable and resistant to rust and warping because it has been treated with a particular technique.

Vinyl Fences

Vinyl fences are an affordable and long-lasting option in Florida. Available in a variety of designs and styles, some with wide picket spacing to allow for airflow in between.In addition to withstanding high-speed winds, this material also shows resistance to rain and snow. This fence will not corrode or bend, regardless of how much water is thrown at it.

Aluminum Fences

Aluminum fencing, like our vinyl fencing, is made specifically for Florida’s extreme weather. Intense testing in a salt environment has shown that our aluminum fences can withstand the effects of salt for more than three thousand hours. Aluminum fences are one of our most premium-looking fence options, and they are a great alternative for windy areas too.

The Fence Styles Western Fence Supply Recommendations For Windy Areas

Shadowbox fences, also known as board-on-board fencing, are built by attaching staggered pickets on either side of the fence rails. This provides seclusion, yet the open spaces between the pickets allow air to flow freely. More wind resistance is provided than on regular privacy fences.

The popularity of this fence style is largely attributable to its suitability for settings where privacy is secondary. The spaces between the pickets are usually the same width, so a lot of wind may still blow through. Traditional homes with picket fences have a timeless appeal and are always a pleasure to see. 

Horizontal rather than vertical, louvered vinyl fence panels are mounted on rails, with each picket rotating between the front and back sides. This fence style allows airflow while still providing privacy for the property.

Any fence style with spacing between pickets allows more airflow and has less wind impact, consequently being more stable during strong wind seasons. Western Fence Supply manufactures and distributes the most durable fences in the market for homeowners, builders, fence contractors, general contractors and the general public in all Florida. Our company wants you and your loved ones to be as safe as possible during hard times, and because of that, we manufacture only the highest quality raw materials by employing ultra-advanced technology. Count on us to repair the damage caused by Hurricane Ian to your fence or to install a brand new vinyl, metal, aluminum, or chain link fence.

Remember, Western Fence Supply is offering big discounts for homeowners affected by Hurricane Ian, take advantage of them now!

Call us now at (239) 689-5496, send us an email at westernfencesupply@gmail.com or click here to get a FREE ONLINE QUOTE! You deserve the best. Save money and time with WESTERN FENCE SUPPLY.

The post Was Your Fence Destroyed By Hurricane Ian? appeared first on Western Fence Supply.

When it comes to vinyl fences, aluminum fences, metal fences and chain-link fences, Western Fence Supply is your best bet in Florida. Our mission is to provide the greatest standard of customer service in the fencing industry while selling high-quality fence goods at competitive costs.

Aluminum Fence Materials

Sections of aluminum fence come as prefabricated panels that may be set up in no time. Each part can have a gradient as steep as 12 degrees “consequently, it is ideal for homes situated on slopes. Residential 1″ x 1-1/8″ rails with 5/8” rail spacing are used in the construction of both 2 and 3 rail systems “screwed-together pickets that form a panel. You can never go wrong with this type of fencing if you want to freshen up your lawn.

In the commercial sector, aluminum fence sections are typically constructed using 1-1/4″ x 1-1/4″ rails and 3/4” “pickets. The thicker material serves to fortify the barrier and makes it more difficult for anything to penetrate the bars.
In addition, rake bottom variations of any style are possible.

Chain Link Fence Materials

The most cost-effective fencing solution for us is a chain link fence. The product is in stock and easily accessible in galvanized and black in four, five, and six foot heights.

All of the components of a fence, including the Chainlink wire, top rail, posts, bands, caps, and screws, are available for purchase separately from Western Fence Supply. By doing this, we aid in making fence repairs easy for homeowners and contractors alike.
We specialize in making unique chain link gates, including rolling, sliding, and cantilever styles. Quick turnaround times for commercial and industrial-quality products with little wait time.

Metal Fence Materials

One of Western Fence Supply’s most popular products is privacy metal fencing, which goes by the brand name Dura Fence. Metal pickets are 7″ in width and are 6′ high, while metal rails measure 1″ by 2″ and are 24′ long, and metal posts measure 2-1/2″ by 8′ long and are assembled with screws.

This material is also available in galvanized steel and powder painted White and Dark Bronze. This material can be sold separately, just like the chainlink. Gates, both conventional swing and sliding v-track varieties, can be custom-made to fit your exact specifications in as little as three to four working days using this material.

Vinyl Fence Materials

Everything is made entirely in-house, making use of only the finest extrusions and components. In order to prevent rusting and degradation from natural elements, all of our mechanically assembled aluminum panels are constructed with stainless steel screws. Single walk gates, double drive gates, and even custom welded estate gates can all be fabricated with precise measurements and welding. 

We, at Western Fence Supply hold all the distributors we buy raw materials from to the highest standards, and this includes Veka, the foremost vinyl fence extrusion company in the United States. Over the years we’ve spent installing fences, we’ve learned the importance of using only the best materials to prevent unnecessary costly reparations. 

In order to ensure that you receive nothing but the finest aluminum fence products, we only work with American raw materials. Closed picket, open picket, and aluminum fence with extra center rails are just some of the available options.

Western Fence Supply is a family-owned and -operated business in Florida with a management team that has been supplying the region with fencing materials for over ten years. Our company specializes in the production and distribution of fence materials, and we are proud to offer only the highest quality vinyl fencing, aluminum fencing, chainlink fencing, and metal fencing to our customers. As the best fence manufacturers in Florida, we would never use subpar materials, and that principle guides our decision not to even offer them. New fence customers all over Florida may have confidence knowing they will receive superior service, quality materials, and the help of expert craftsmanship when they work with us to update their fencing.

SUPERIOR QUALITY THAN REGULAR FENCE WHOLESALERS

Home Depot and Lowes are only two of many of our competitors in Florida that offer low-quality fencing products at inflated costs. However, it is not what we do around here. At wholesale pricing, our vinyl fences, aluminum fences, chainlink fences, and metal fences all outperform the standards set by the industry. They also conform to all Florida building codes. 

If you, your loved ones, or your neighbors are in the market for a new fence, know you can count on us. If you’re looking for fencing at the lowest prices anywhere in Florida, go no further; we offer factory-direct pricing, the quickest turnaround times, the fastest deliveries, and the highest quality materials available. 

We are the first of our kind in the sunshine state and carry a wide variety of fencing materials, including fence panels, fence posts, gates, caps, hardware, frames, and more.

CALL US NOW AT (239) 689-5496, send us an email at westernfencesupply@gmail.com, or get a FREE ONLINE QUOTE NOW BY CLICKING HERE! Our team of experts is ready to begin manufacturing your dream fence. The right moment is now!

The post Where Is The Best Place To Buy Fence Materials In Florida? appeared first on Western Fence Supply.

There are so many factors to consider that you may have a hard time knowing where to start. Because we want you to make the smartest decision, here are some of our tips for choosing a fence manufacturer in Southwest Florida:

Finding a reliable fence company starts with completing some preliminary research. Try looking for fence companies in your area online and making a shortlist of the ones that stand out to you. 

It is important to take your time while researching fence contractors online since many of them have websites that provide extensive information about their business and services. Look through the photographs they’ve uploaded from previous work, and ask them for an evaluation of whether or not they’d be a suitable fit for your project. 

Review the fence companies past fence installation or supply projects

When you’ve settled on a fence distributor, it’s time to learn more about their past work and how long they’ve been in the industry. While manufacturing a durable fence might not appear to be that challenging at first glance, there are actually more factors to consider than most people know.

Choose a business that can provide references from satisfied customers. You can either take a further look into their previous fencing projects on a physical portfolio or online gallery. This will not only prove their authenticity, but it will also give you an idea of whether or not their design aesthetic aligns with your own. You need to be able to tell a legitimate business from one that is just trying to take your money.

Due to the complexity of the task at hand, it is recommended that you use an experienced local fencing contractor with a management team that has decades of experience in the fencing industry, like Western Fence Supply.

In the end, this will prevent you from experiencing emotional distress and financial loss. If you hire a contractor with this much experience, you can rest assured that your project won’t be bogged down by inexperienced mistakes.  

Getting a price quote should always be as easy as making a phone call or sending an email. With the estimate in hand, you may have complete confidence in your understanding of the costs and requirements of the manufacturing of your dream fence.

Find the best estimate on fencing materials or installation

Another important factor when hiring professionals for any kind of home improvement is to get various estimates. The more estimates you get, the more likely you are to find a wide range of bid prices that will make it easier to settle on the optimal trade-off between price and quality for your project. 

This may seem like an overwhelming chore to those who already have full schedules. Obtaining fencing manufacturing quotes is a breeze. The fence industry is cutthroat, therefore fence wholesalers like us understandably try to be as accommodating as doable and as prompt as possible.

Remember: a formal, written estimate for the services you need should be provided to you by any reliable fence supplier; if they don’t, you should look elsewhere.

Take advantage of testimonials and suggestions from others to help you make a decision.

One of the best indicators of a business’s value is positive feedback from its customers. Google is a good place to do your review investigation. Many of these businesses have received Google reviews that are ideal for learning about their reliability, helpfulness, and customer service from the perspectives of other consumers.

Input search terms along the lines of  “fence contractor near me” and several local fence manufacturing companies will be displayed, or type in your preferred fence company and there should be a star rating and a link to user reviews next to the choice.

Check out the fence wholesalers with the highest star ratings like Western Fence Supply, and read through the reviews left by previous clients to find the best one for you. The next step is to compile a list of qualified applicants. You should be able to know more about their work with the help of these resources.

Check out our 5 star reviews by clicking here!

To what extent does the fence company stand behind its work? Is there a warranty on the product and on the labor to put it in place? Is the guarantee limited to the work put in, or does it extend to the materials as well? Fence companies should always offer a manufacturer’s guarantee. This means that if a fence panel, post or accessory is manufactured in a faulty state, they should be able to replace it without charge.

Sometimes the cheapest fence in Southwest Florida can become the most expensive!

High-quality fences will save you money on future expensive reparations. Make sure to always put quality on top of saving money. Our PVC Fences, aluminum fences, metal fences and chain link fences are manufactured to be as durable and reinforced as a fence can be.

Obtain exactly what you’re looking for. Get ideas by perusing publications and other properties, and then show pictures of what you want to the fence supplier so that they can get a good feel for your preferences. Don’t be shy about seeking input or help with your designs.

Investing in a reliable business that manufactures swiftly and employs high-quality supplies is a smart move. Residents in the area may wonder, “how to choose the right fence company?” Western Fence Supply is the best Southwest Florida fence company to get PVC, Aluminum, Chain link and Metal fences from.

The management of Western Fence Supply has been in the fencing industry for more than ten years, now bringing their wealth of experience in the field to Southwest Florida. We sell only the highest quality vinyl fencing, aluminum fencing, chainlink fencing, and metal fencing as a fencing fabrication and fencing material supply company.

High Quality and Low Prices

Similarly to how we wouldn’t install subpar fencing materials, we also won’t sell them. A new fence from us will provide you with the greatest service, the best quality, and the best fence installation possible for your home in southwestern Florida.

Make the smarter decision now and save on unnecessary reparations! Get in contact with us and receive a free quote. A customer service expert will provide you all the information you need about our company, and the products we offer and tell you more about why Western Fence Supply is the top fence manufacturer and distributor in Southwest Florida.

Call us at (239) 689-5496, send us an email to westernfencesupply@gmail.com or click here to get a FREE QUOTE ONLINE NOW!

You deserve the best. Our team of experts is ready to begin working on your next successful fencing project.

The post How to Choose a Southwest Florida Fence Company appeared first on Western Fence Supply.